Com'on now Charlie, you had enough coffee now to smack him down for posting the "board stealer" comment... Certainly that should be enough coffee to come up with an answer on how to get these rods lined back up... <img src="/forums/images/graemlins/smile.gif" alt="" /> Anything?

By the way, at this point, I've done all I can, without any more information. I've pushed, I've pulled, I've pried, I've kicked, I've been IN gear, OUT of gear, switching between gears, running, not running, etc...

I'm thinking perhaps there's something stupid that's preventing this from moving that I don't know about, like a vacuum lockout that I have to disable first, or something along those lines.

I will gladly buy whatever information I have to, if anyone knows where to find it, although I will take it with a grain of salt now that I put out $14 for a manual that didn't include any information about what I need to know here... And certainly I'd be happy to upload whatever I buy for the good of the group.

Incidentally, that manual I bought was the one broken link on the FAQ -- the one for the manual I downloaded. I'll gladly FTP it someplace so that the links can be made complete again -- someone just has to tell me where to send it via FTP, as I do not currently have a web storage option. You can e-mail me directly with that information -- first initial, last name, @ live.com or msn.com or yahoo.com... I used to have aol.com too but one of my ex's screwed that one up. That was before I installed EXGFSecurity 2.0 though.... <img src="/forums/images/graemlins/wink.gif" alt="" />