GM 3.8 v6 swap ?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: GM 3.8 v6 swap ? [Re: raiderquest] #922138 12/23/08 10:08 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

some Aussie company (Mark's 4wd?) used to make a conversion kit for a 3.8 to a pajero gen1. Advanced Adapters was their US agent. Don't know if it was for the wide or narrow block engine, tho.

A Buick GNX 3.8 would be kinda quick, but then so would a 4.3 Typhoon/Syclone...

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
GM 3.8 v6 swap ?	raiderquest	12/23/08 08:07 PM
Re: GM 3.8 v6 swap ?	vr4	12/23/08 08:35 PM
Re: GM 3.8 v6 swap ?	LandRaider	12/23/08 08:55 PM
Re: GM 3.8 v6 swap ?	raiderquest	12/23/08 09:15 PM
Re: GM 3.8 v6 swap ?	fasteddy	12/23/08 10:08 PM
Re: GM 3.8 v6 swap ?	raiderquest	12/24/08 02:41 PM
Re: GM 3.8 v6 swap ?	NathanC	12/25/08 07:54 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.463s Queries: 16 (3.461s) Memory: 0.6058 MB (Peak: 0.6388 MB) Data Comp: Off Server Time: 2026-06-10 03:15:18 UTC
Valid HTML 5 and Valid CSS