|
|
|
|
 Re: Question on Toyota axles
[Re: sparkem]
#922239
12/26/08 02:22 PM
|
Joined: May 2003
Posts: 1,121
Body Damage is Cool
|
The 8" toyota solid axle is to narrow for a mitsu. A 60 series Land Cruiser will fit. Best thing is to swap both or find a FSJ 6lug dana 44 that fits, WMS should be around 59".
1987 SWB Pajero 2.5 TDI on 31" rubber waiting for a hip replacement and bigger shoes
|
|
|
Re: Question on Toyota axles
[Re: PartyTruck]
#922240
12/26/08 09:11 PM
|
Joined: Mar 2006
Posts: 272
Mudrunner
|
Its easy to widen the front diff to 58" wide. And finding anything dana 44 and up in a drivers side drop is next to impossible around here. I've been searching for 2 years for one that doesnt cost more than the truck is worth.
Eric Wegerich
89 Montero as chopped as can be. Now with 5.29's
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 1.817s Queries: 16 (0.004s) Memory: 0.5932 MB (Peak: 0.6585 MB) Data Comp: Off Server Time: 2026-06-22 21:05:49 UTCValid HTML 5 and Valid CSS 
