To double re-quote myself from the above posts:

Quote
Quote
The 34x12.5 TSLs weigh 60lbs and the 15x8 Street Locks with 3.75bs are as heavy as it gets with steel wheels.


Out of the backspacing and offset I do know the offset (quoted above). 3.75bs seems to be a good amount to fit 12.5" wide tires in most scenarios with minimal/no rubbing.


And to quote straight off the website:
Pro Comp Rock Crawler Steel Wheels Black 152 Series 15x8, 6x5.5, 3.75" Backspacing, Painted Black Finish

I still have my sway bar yes, the rims are only 8" wide, and have 3.75" BS. The only thing that has been done is the bumper end cap trimming, hammering of the splash guard, and now the torsion bar crank. And the t-bar crank of about an inch solved the rubbing issues on road. As far as off-road goes I haven't gotten to try it, and won't probably till April. But rubbing wasn't a big issue off-road, it was on-road with the tires aired up to 26psi when I had the rubbing issues. So I am sure off-road it will just give them more room to stuff and eliminate any of the very rare/minor rubbing there was (compared to on road when there was much more rubbing at full turn etc).

Last edited by DRaider90; 12/30/08 05:38 AM.