Chevy spring swap mostly done, spring travel questions

Print Thread

Rate Thread

Re: Chevy spring swap mostly done, spring travel questions [Re: wsquaredodie] #923823 01/08/09 07:29 PM

Joined: Nov 2008

Posts: 63

Lafayette, CO

Chip

Getting the Wheeling Fever

Thanks for that one too. I had forgotten about re-arcing the springs. I should probably weigh the truck and then talk to the spring shop to see what their thoughts are.

One thing that I don't know is how far a spring can bend before it's deformed. Then ask the spring shop to give it enough arc so that it will be an inch or three from that point when it hits the bump stops.

Entire Thread
Subject	Posted By	Posted
Chevy spring swap mostly done, spring travel questions	Chip	01/05/09 05:51 AM
Re: Chevy spring swap mostly done, spring travel questions	ErikB	01/06/09 04:26 PM
Re: Chevy spring swap mostly done, spring travel questions	Chip	01/06/09 05:02 PM
Re: Chevy spring swap mostly done, spring travel questions	ErikB	01/06/09 06:14 PM
Re: Chevy spring swap mostly done, spring travel questions	Chip	01/06/09 06:28 PM
Re: Chevy spring swap mostly done, spring travel questions	wsquaredodie	01/08/09 02:30 AM
Re: Chevy spring swap mostly done, spring travel questions	Chip	01/08/09 07:29 PM
Re: Chevy spring swap mostly done, spring travel questions	wsquaredodie	01/08/09 07:37 PM
Re: Chevy spring swap mostly done, spring travel questions	Chip	01/09/09 05:01 PM
Re: Chevy spring swap mostly done, spring travel questions	Chip	01/18/09 05:03 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social: