Torsion Bars

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Torsion Bars [Re: BigSwede] #924111 01/11/09 02:54 AM

Joined: Feb 2004

Posts: 26

Jacksonville, NC

Airborne6176 Offline

Getting the Wheeling Fever

Is it possible to reset/re-index torsion bars so the vehicle will ride at the same height as if they were cranked or tightened? Will this affect suspension travel?

Thanks!

'02 Rodeo Sport, 3.2l V6, 4WD Hardtop, 3" lift, Rancho 9000X's, StinkyFab front & rear tube bumpers, K&N Air Filter, PowerVault muffler, 285/75/16 Nitto ATs w/ steel rims, more soon...

Entire Thread
Subject	Posted By	Posted
Torsion Bars	Trooper4ever	01/06/09 11:57 PM
Re: Torsion Bars	RobG	01/07/09 02:06 PM
Re: Torsion Bars	BigSwede	01/07/09 03:37 PM
Re: Torsion Bars	Airborne6176	01/11/09 02:54 AM
Re: Torsion Bars	BigSwede	01/11/09 06:46 PM
Re: Torsion Bars	Ditchdoc	01/12/09 03:03 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.648s Queries: 16 (3.645s) Memory: 0.6020 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-06-07 20:57:28 UTC
Valid HTML 5 and Valid CSS