bending HREW tubing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: bending HREW tubing [Re: Kookadala] #924681 01/27/09 01:10 PM

Joined: Apr 2002

Posts: 3,622

Brookfield, WI

NathanC

Roll Me Over

Tube and pipe also have different diameters. Pipes have nominal size designations while tubing has tighter tolerances that are held to the OD.

'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike

Entire Thread
Subject	Posted By	Posted
bending HREW tubing	Kookadala	01/08/09 06:15 PM
Re: bending HREW tubing	4x4Wire	01/22/09 09:16 PM
Re: bending HREW tubing	Kookadala	01/23/09 06:12 PM
Re: bending HREW tubing	4x4Wire	01/24/09 05:46 AM
Re: bending HREW tubing	NathanC	01/27/09 01:10 PM
Re: bending HREW tubing	Greg_Canada	02/27/09 09:18 PM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.502s Queries: 16 (3.500s) Memory: 0.6009 MB (Peak: 0.6339 MB) Data Comp: Off Server Time: 2026-06-11 07:49:47 UTC
Valid HTML 5 and Valid CSS