|
|
|
|
transfer case parts sourcing
#924694
01/08/09 08:29 PM
|
Joined: Jan 2005
Posts: 616
OP
Rock Warrior
|
looking for vendors. <img src="/forums/images/graemlins/confused.gif" alt="" />
so my np321 is tired. i've used it for the occasional "oh crap" for too long and it does little if anything to get the front in on the action. i usually order rebuilt stuff so i know little about rebuilding. the kits i'm seeing only contain bearings/seals/gaskets with an occasional chain to add on. won't i need the drive gears in addition to the chain? wanna throw some of your favorite vendors names around?
<img src="/forums/images/graemlins/cheers.gif" alt="" />
94 yj 456gears, detroit locker and 30 spline axles out back, 33" bfgs
|
|
Re: transfer case parts sourcing
[Re: tomriddle]
#924695
01/08/09 11:00 PM
|
Joined: Oct 2003
Posts: 7,768
Web Wheeler
|
Tom if I was gonna break into my transfer case I'd go ahead and take it out and apart and SEE what I needed. Then price the needed parts and if they were too high I'd purchase a USED one that I had already found. Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />
professional bovine relocation specialist
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5902 MB (Peak: 0.6384 MB) Data Comp: Off Server Time: 2026-05-29 15:09:21 UTCValid HTML 5 and Valid CSS