heavy handed blunder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: heavy handed blunder [Re: MAC] #924942 01/11/09 04:37 PM

Joined: Mar 2004

Posts: 104

Tucson,Az

lawnmowerman Offline

Wheeler

Use a left handed drill bit.There is a good chance that the remainder of the bolt will thread right out.

Entire Thread
Subject	Posted By	Posted
heavy handed blunder	MAC	01/10/09 10:49 PM
Re: heavy handed blunder	Adam F	01/11/09 03:16 AM
Re: heavy handed blunder	lawnmowerman	01/11/09 04:37 PM
Re: heavy handed blunder	MAC	01/11/09 05:00 PM
Re: heavy handed blunder	OOP'S	01/11/09 07:27 PM
Re: heavy handed blunder	wsquaredodie	01/12/09 02:00 AM
Re: heavy handed blunder	KiwiCowboy	01/12/09 05:32 AM
Re: heavy handed blunder	EtienneNavaar	01/13/09 06:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.498s Queries: 16 (3.495s) Memory: 0.6063 MB (Peak: 0.6393 MB) Data Comp: Off Server Time: 2026-06-18 21:09:33 UTC
Valid HTML 5 and Valid CSS