1997 Mazda halfshafts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1997 Mazda halfshafts [Re: Adam F] #925058 01/13/09 05:58 PM

Joined: May 2007

Posts: 4,628

Buford, Georgia

hazy_daze

Roll Me Over

I was thinking the nut for the lower ball joint was pretty hard to get to, like in between the lower control arm and the joint itself. And this car doesn't have upper ball joints, the strut attaches directly to the knuckle.

Fasteddy's advice is occasionally sound...

Entire Thread
Subject	Posted By	Posted
1997 Mazda halfshafts	Brown81CJ5	01/11/09 04:50 PM
Re: 1997 Mazda halfshafts	Adam F	01/11/09 05:46 PM
Re: 1997 Mazda halfshafts	Brown81CJ5	01/12/09 01:45 AM
Re: 1997 Mazda halfshafts	Adam F	01/12/09 03:53 PM
Re: 1997 Mazda halfshafts	hazy_daze	01/13/09 04:49 PM
Re: 1997 Mazda halfshafts	Adam F	01/13/09 05:49 PM
Re: 1997 Mazda halfshafts	hazy_daze	01/13/09 05:58 PM
Re: 1997 Mazda halfshafts	Adam F	01/13/09 09:38 PM

Moderated by 4x4Wire, 52degrees, Adam F, Axe Man, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.620s Queries: 16 (3.618s) Memory: 0.6091 MB (Peak: 0.6421 MB) Data Comp: Off Server Time: 2026-06-05 06:55:06 UTC
Valid HTML 5 and Valid CSS