In the process of bringing the new monty up to full operating status there are a number of 'necessities' that I'll need. No, this isn't an 'off-roader' charity thread so if you have what I want, just let me know what you want for it. Of course, if you want to consider me a charity and simply send it to me, that would be great too. <img src="/forums/images/graemlins/wink.gif" alt="" /> TIA!

Owners Manual
Just getting to know my rig better is all. I've already gotten the FSM but want the owners manual(s) as well if anyone has it. If you have a pdf of it, that would be excellent as well.

I checked ebay and there's one I'm gonna bid on (on the final day) and another that some fool wants $119 for. <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

longer rear coils
I know there's valley but I'm not too keen on their products as I've had a bad experience with them before. What else is everyone running? Does Iron Man make a set for the Gen II monty? ARB? Yes, I've searched but it didn't come up with anything too conclusive unlike the gen I's (putting Gen II's in them).

timing belt / belts / pulleys / tensioner
Who's got the cherry price on a good quality timing belt/waterpump kit?

February 19, 2009: New Safari 'like' snorkel installed. Documented here.
February 20, 2009: New BFG 35x12.5x15" MT KM2 tires installed. Documented here.
March 6, 2009: Front and rear tube bumpers and new roof rack Documented here.
April 30, 2009: Repaired my main starter wire coming from the battery. The terminal end on the battery was so badly corroded I had to remove 4+ inches of cable to get to good cancer/corrosion free wire. Documented here.
May 4, 2009 Repainted my rusting window sills and created a camera hard mount. Documented here.
August 28, 2009 Had a bit of liposuction on the rear end and had some extra fat removed. Documented here.
August 29, 2009 Replaced burnt out bulbs in my instrument cluster ([D] tranny 'drive' light, etc.). Documented here.
September 12, 2009: Mounted my HiLift to my Roof Rack for a few $$$. Documented here.
October 7, 2009: Built and installed a storage system & sleeping platform in back for ~$75. Documented here.
Jan 6, 2010: Ordered 78" Tacoma sliders from Trail-Gear.com including their gusset kit for $210 (subtotal, tax, & shipping). Installing in the next couple of weeks. Will have complete documentation here.
March 7, 2010: Installed Hella 700ff lights on bumper's upper light perches & extra 12v power plug in center console. Documented here.
June 26, 2010: Raised the fuel tank mounts +3" and mounted up a new fuel tank sans brush plate since I'll be fabbing up a new beefier skid plate in its place. Documented here.
July 1, 2010: Timing Belt, Pulleys, Tensioner, Front Seal, etc. changed (preventative maintenance). Documented here.
July 15, 2010: Installed Trail-Gear Rock Sliders. Documented here.
July 23, 2010: Installed Baja Rack Jerry Can Holders on my non-Baja Rack (modified to fit). Documented here.
November 13, 2010: Replaced faulty ignition switch. Documented here.
November 17, 2010: Replaced faulty brake pedal switch. Documented here.
May 22, 2011: Installed coil spring spacers & removed anti-sway bars. Documented here.
August 10, 2011: Upgraded bumper with custom winch plate and installed MileMarker SEC12000 electric winch. Documented here.
August 17, 2011: Installed custom ipad mounting plate for RAM ipad mount along with a Dual xgps150 ipad compatible bluetooth gps. Documented here.
October 1, 2011: Moved 1 of the 2 gas can holders from the roof rack to the bed while still retaining the ability to use it as a bed. Documented here.
June 2012: Installed 3.15:1 transfer case gears. Documented here.
July 20, 2012 Installed Euro Spec rear tail lights. Yay, I have reverse lights now which lost when I upgraded to an aftermarket bumper since US Spec Gen II's only have reverse lights in the bumper rather than the tail light housing.
Still to be built & installed...
Custom Skid Plates
<img src="/forums/images/graemlins/lol.gif" alt="" />