depends on the size of the phillips head screw that you are trying to turn, there are different size screwdriver bits for different size screws. the screw driver that came in the mitsu montero is a medium sized screwdriver bit b/c most the interior screws are of that size. if you try to use a medium screw driver bit on a large phillips head screw, it will round it out.


97 Montero SR w/Mitsu Adj Shocks & Rear Diff Lock ARB Front Diff Lock 4.9 Ring/Pinion 3.15 transfer box 43:1 crawl ratio 2" suspen lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs 15x10 Wheels Rock Sliderz ARB front bumper w/12k winch Custom rear bumper