Looking for a Gen2 park/neutral position switch

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Looking for a Gen2 park/neutral position switch [Re: nedfunnell] #926882 01/21/09 05:13 PM

Joined: May 2007

Posts: 4,628

Buford, Georgia

hazy_daze

Roll Me Over

NAPA P/N is NS5628. It'll more than likely be a Mitsu part in the box. I can sell it to you for $115 freight in. Or you can get it from www.mitsubishiparts.com for $111 plus freight. The Mitsu P/N is MR166194. Or you can search salvage yards for it.

Fasteddy's advice is occasionally sound...

Entire Thread
Subject	Posted By	Posted
Looking for a Gen2 park/neutral position switch	nedfunnell	01/21/09 05:31 AM
Re: Looking for a Gen2 park/neutral position switch	hazy_daze	01/21/09 05:13 PM
Re: Looking for a Gen2 park/neutral position switch	nedfunnell	02/04/09 04:21 AM
Re: Looking for a Gen2 park/neutral position switch	hazy_daze	02/04/09 02:39 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.750s Queries: 16 (3.748s) Memory: 0.6002 MB (Peak: 0.6332 MB) Data Comp: Off Server Time: 2026-06-17 04:57:22 UTC
Valid HTML 5 and Valid CSS