Header swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Header swap #927476 01/25/09 04:49 PM

Joined: Dec 2008

Posts: 66

minydigger Offline

Getting the Wheeling Fever

My stock 2000 exhaust manifold is cracked and in need of replacing but I was wondering if there is a compatible header that might be made to fit. A small amount of fabrication I can handle but I'm not looking to build a header from scratch. So whats out there??

94 Zj custom suspension and other stuff
01 F250 tow hoe 5" exhaust
00'sporty 3" lift 235's

Entire Thread
Subject	Posted By	Posted
Header swap	minydigger	01/25/09 04:49 PM
Re: Header swap	Everet	01/25/09 06:44 PM
Re: Header swap	4runnernomore	01/26/09 01:29 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.518s Queries: 15 (3.516s) Memory: 0.5960 MB (Peak: 0.6289 MB) Data Comp: Off Server Time: 2026-06-02 22:28:30 UTC
Valid HTML 5 and Valid CSS