Reciver hitch/ bumper and frame geometry

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Reciver hitch/ bumper and frame geometry [Re: suba] #927808 01/27/09 10:09 PM

Joined: Apr 2006

Posts: 658

Honeoye NY

wsquaredodie Offline

Rock Warrior

Probably will not fit but............I am in the middle of replacing my rotted out 93 T100 step bumper with a Kenneshaw Mountain unit. The bolt on receiver hitch I took off is in like new condition....Will be posting pics of the project in a few days.

trafdlo

Entire Thread
Subject	Posted By	Posted
Reciver hitch/ bumper and frame geometry	suba	01/27/09 05:46 PM
Re: Reciver hitch/ bumper and frame geometry	4Crawler	01/27/09 06:53 PM
Re: Reciver hitch/ bumper and frame geometry	RatLabGuy	01/27/09 08:01 PM
Re: Reciver hitch/ bumper and frame geometry	wsquaredodie	01/27/09 10:09 PM
Re: Reciver hitch/ bumper and frame geometry	yota4runna	01/28/09 09:47 PM
Re: Reciver hitch/ bumper and frame geometry	KiwiCowboy	02/01/09 08:11 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.509s Queries: 16 (3.507s) Memory: 0.6034 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-06-22 14:33:53 UTC
Valid HTML 5 and Valid CSS