valve stem seals? replace or not?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: valve stem seals? replace or not? [Re: DamKia] #928345 01/31/09 02:08 AM

Joined: Apr 2005

Posts: 56

Brisbane, Australia

menotthat

Getting the Wheeling Fever

i plan to put it all back in same holes. but thanks for clearing up that it doesnt matter if i spin the valve, only that i must go back in the same valve hole.

so i might as well do it now. may save me a hassle and money later.

cheers guys

97 sportage, mostly stock apart from king springs front and rear, monroe shocks, k&n filter, pioneer mp3 cd, rampage 2x 10"subs and rampage amp.

Entire Thread
Subject	Posted By	Posted
valve stem seals? replace or not?	menotthat	01/30/09 11:23 AM
Re: valve stem seals? replace or not?	DamKia	01/30/09 03:10 PM
Re: valve stem seals? replace or not?	Everet	01/30/09 04:05 PM
Re: valve stem seals? replace or not?	fokion	01/30/09 10:04 PM
Re: valve stem seals? replace or not?	menotthat	01/31/09 02:08 AM
Re: valve stem seals? replace or not?	DennisThompson	01/30/09 10:56 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.509s Queries: 16 (3.507s) Memory: 0.6027 MB (Peak: 0.6357 MB) Data Comp: Off Server Time: 2026-07-16 12:20:31 UTC
Valid HTML 5 and Valid CSS