Ok - jetting.

I've found some info from Redline here

Redline Weber

which has an interesting inclusion ...

Quote
A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to todayÆs leaner fuels. Some symptomÆs of a lean fuel condition are: needing to adjust the idle too high, rough idle, hesitation or a stumble on acceleration, a flat spot at around 2500 RPM and/or surging at a constant RPM in higher gears


which would explain some of the problems I've had.
But enough of Mikuni.

I'm without a clue about which jets to use/get for the Weber.

I live and travel at around sea level to 1500ft, with a humidity level that's almost always well above 90%, and a temperature range of 17c minimum to 45 max (in shade).

Any ideas?

And again, thanks for the help and help offers.



Last edited by RobCambo; 02/06/09 03:09 PM.
1986 Pajero 2.6l 5spd manual SWB

http://s690.photobucket.com/albums/vv265/RobCambo/