not sure if I can post this or not ? .... 3 day blitz.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: not sure if I can post this or not ? .... 3 day blitz. [Re: CJM] #928581 02/01/09 08:06 PM

Joined: Oct 2004

Posts: 161

Connecticut

pugski1043 Offline

Wheeler

CJ

Any tips on how to install the chrome wheel well trim to the fiberglass panels? The factory set is held on with the same hardware that was used for the inner wheel well molding.

thanks Jim

1994 Toyota Pickup 22RE, EB 268 cam , 2.25 LCE exhaust.
1988 Toyota 4Runner, mostly stock but hopefully not for long

Entire Thread
Subject	Posted By	Posted
not sure if I can post this or not ? .... 3 day blitz.	CJM	01/31/09 02:32 AM
Re: not sure if I can post this or not ? .... 3 day blitz.	Greg_Canada	01/31/09 03:27 AM
Re: not sure if I can post this or not ? .... 3 day blitz.	CJM	01/31/09 03:47 AM
Re: not sure if I can post this or not ? .... 3 day blitz.	pugski1043	02/01/09 08:06 PM
Re: not sure if I can post this or not ? .... 3 day blitz.	CJM	02/02/09 03:03 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.466s Queries: 16 (3.464s) Memory: 0.6017 MB (Peak: 0.6347 MB) Data Comp: Off Server Time: 2026-06-02 14:58:13 UTC
Valid HTML 5 and Valid CSS