Quote
Okay, need more feedback. Here's what I found...

Stock 15x7 wheel on my 1997 SR has a bore of 108mm and approx. 4.50" backspacing from mounting surface to outside edge.

FJC 17x7.5 has a bore of 106mm and approx. 4-7/8" from mounting surface to outside edge.

The FJC wheel is 1/2" wider, but most of the width will be inboard. Has anyone had any experience running a wheel with 5" BS on a GenII? Any ideas if it will fit? I know it's only .5" but that can make a difference.

Thanks!


If the tire is made for exactly 106mm hub you will need to bore it out further which can be a pain.

BS fit will depend on the size tire you plan on using which you haven't said. <img src="/forums/images/graemlins/confused.gif" alt="" />

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page