22re engine fault code vs. 'limp mode'...??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

22re engine fault code vs. 'limp mode'...?? #929727 02/06/09 12:32 AM

Joined: Aug 2007

Posts: 66

Phoenix AZ

AZcoma

Getting the Wheeling Fever

If your 22re incurs a EFI error code... does it kick the ECU into a limp mode and keep it that way until your reset it? Or, does it just store the error code and perform as normal? I have a feeling it's the first option as I incurred a code 6 (missing signal from dist.) and the engine just didn't feel right. After resetting the code via pulling the EFI fuse... Now it feels stronger running again.

'86 4x4 SR5 22re 5" lift 35" BFG's and 5:29 gears.
'05 4x4 DC Tacoma TRD Sport

Entire Thread
Subject	Posted By	Posted
22re engine fault code vs. 'limp mode'...??	AZcoma	02/06/09 12:32 AM
Re: 22re engine fault code vs. 'limp mode'...??	4Crawler	02/06/09 01:59 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.469s Queries: 15 (3.467s) Memory: 0.5942 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-19 05:03:42 UTC
Valid HTML 5 and Valid CSS