Quote
Okay..now another problem. The crankshaft pulley is stuck. I've soaked it with WD40 for 2 days and used a half can of CRC Freeze Off so far today.
The 3 arm puller is as tight as I can get it and it's center "push" bolt is bending from the pressure. I actually had to use my holder bar to keep from rotating the motor.
Any ideas? <img src="/forums/images/graemlins/baby.gif" alt="" />


WD40 should not be used as a penetrating oil to loosen bolts. It's primary use is to displace water.

I'd start by using a proper penetrating oil. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page