sorry i kant get a camera out today...no where near a computer that will do that. anyways thats a nice picture of the bolt thats two inches below the threaded mystery hole. if the cover was off (two bolts!) it would be very much the only object behind the cam pulley in view. great angle exactly for the shot. anyways since i can always remove the cover and add the whatever i moved on. ever notice how one bolt on water pump is actually for the large accessory bracket and lists 33 lbs of torque while all other bolts on water pump is 17 lbs? that is nuts. thats right one bolt is omitted until you put the acc bracket on and takes a long one thru the bracket. at least according to fsm. probably written by a mia pow they captured and still torture. probably needs valve guides and rear seals and a freakin oil pan gasket. i put the new crank bolt ...2nd revision one, third ones a charm. less than impressed.