ifs rebuild, a-arm, sway, tie-rods

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: ifs rebuild, a-arm, sway, tie-rods [Re: rolled] #930683 02/11/09 03:18 PM

Joined: Aug 2003

Posts: 2,854

Toronto, Canada

Greg_Canada Offline

Roll Me Over

Remember, you get what you pay for, i always spend $ on the best if i can afford it.
Might as well throw some bilsteins under it, theyre pretty easy to change...

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Entire Thread
Subject	Posted By	Posted
ifs rebuild, a-arm, sway, tie-rods	rolled	02/11/09 07:02 AM
Re: ifs rebuild, a-arm, sway, tie-rods	Greg_Canada	02/11/09 03:18 PM
Re: ifs rebuild, a-arm, sway, tie-rods	Staceman	02/11/09 05:53 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.538s Queries: 16 (3.536s) Memory: 0.5966 MB (Peak: 0.6295 MB) Data Comp: Off Server Time: 2026-05-31 20:41:52 UTC
Valid HTML 5 and Valid CSS