ifs rebuild, a-arm, sway, tie-rods

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: ifs rebuild, a-arm, sway, tie-rods [Re: Greg_Canada] #930684 02/11/09 05:53 PM

Joined: Sep 2003

Posts: 1,686

Phoenix, Az

Staceman

Body Damage is Cool

I wouldn't worry about the oblong hole for the sway bar. Me, like a lot of folks, don't even use a swaybar. Leave it off, go for a ride. You just may decide to leave it off.

85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!

Entire Thread
Subject	Posted By	Posted
ifs rebuild, a-arm, sway, tie-rods	rolled	02/11/09 07:02 AM
Re: ifs rebuild, a-arm, sway, tie-rods	Greg_Canada	02/11/09 03:18 PM
Re: ifs rebuild, a-arm, sway, tie-rods	Staceman	02/11/09 05:53 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.478s Queries: 16 (3.476s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-04 09:54:10 UTC
Valid HTML 5 and Valid CSS