Are the 2.6 an interference motor?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Are the 2.6 an interference motor? [Re: fasteddy] #930965 02/14/09 02:40 PM

Joined: Apr 2008

Posts: 441

Petoskey, Michiagan

TainterRacing Offline

Mudrunner

I have a bent 2.6 head right now off my dad's motor yes it will mess the valves up. (Intake only)

1997 Montero LS with a motor swap a 1990 V6 12valve ported heads full 2.5in Ex I run stock tire size for Daily use, off road have 33x12.5 working on going trubo.

Entire Thread
Subject	Posted By	Posted
Are the 2.6 an interference motor?	gilamontero	02/13/09 05:53 AM
Re: Are the 2.6 an interference motor?	NathanC	02/13/09 02:05 PM
Re: Are the 2.6 an interference motor?	Kevin C	02/13/09 06:13 PM
Re: Are the 2.6 an interference motor?	fasteddy	02/13/09 06:29 PM
Re: Are the 2.6 an interference motor?	TainterRacing	02/14/09 02:40 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.542s Queries: 16 (3.540s) Memory: 0.6009 MB (Peak: 0.6339 MB) Data Comp: Off Server Time: 2026-06-17 12:26:57 UTC
Valid HTML 5 and Valid CSS