volt guage not working

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: volt guage not working [Re: krauthead] #931643 02/26/09 10:13 AM

Joined: May 2006

Posts: 457

Northern Calif

Davepet

Mudrunner

Quote

The gauge is at zero with the ignition off. When the key is on it goes to about 14V. When you start the engine it goes to 18V.

Sound like an inaccurate gauge. What does your external VOM read with the key on but not running?

Dave

Entire Thread
Subject	Posted By	Posted
volt guage not working	krauthead	02/17/09 09:49 PM
Re: volt guage not working	fourwd1	02/19/09 01:46 AM
Re: volt guage not working	KiwiCowboy	02/19/09 05:34 AM
Re: volt guage not working	krauthead	02/25/09 11:11 PM
Re: volt guage not working	Davepet	02/26/09 10:13 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.661s Queries: 16 (3.660s) Memory: 0.6006 MB (Peak: 0.6336 MB) Data Comp: Off Server Time: 2026-05-27 03:56:30 UTC
Valid HTML 5 and Valid CSS