|
|
|
|
Re: Idler Arm
[Re: torquemonster]
#933218
02/25/09 10:57 PM
|
Joined: Sep 2007
Posts: 39
Getting the Wheeling Fever
|
NAPA quoted me ~$100 for a 1992 Montero one..... So I found an idler/pitman arm combo pack off Ebay for ~$40...... I put the idler in and it has been good. It came with a grease nipple (which the old one didn't have) so I've been greasing it regularly in hopes that it will last a long time.......
Haven't put in the pitman arm yet - old one is fine, and it's a PITA to get the old one off. I'm going to rebuild my steering box soon so I'll probably put on the new pitman arm then.......
Speaking of rebuilding my steering box, does anyone know if there are weird and wonderful bearings inside? I'm hoping I can just get new ones easily from NAPA...
1991 JDM Pajero Exceed
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.394s Queries: 16 (3.392s) Memory: 0.5993 MB (Peak: 0.6323 MB) Data Comp: Off Server Time: 2026-05-27 06:52:31 UTCValid HTML 5 and Valid CSS