U-joint replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: U-joint replacement [Re: RatLabGuy] #933478 02/28/09 06:32 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Usually not, all the ones I have seen are the same splines all the way around. Usually best to paint a mark across the slip yoke to help you re-align it in case it comes apart, or you can re-phase the u-joints if needed:
http://www.4crawler.com/4x4/CheapTricks/Driveline-101.shtml#Phasing

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
U-joint replacement	RatLabGuy	02/27/09 07:01 PM
Re: U-joint replacement	sdsnowman	02/27/09 07:59 PM
Re: U-joint replacement	Adam F	02/28/09 05:05 AM
Re: U-joint replacement	RatLabGuy	02/28/09 06:22 AM
Re: U-joint replacement	4Crawler	02/28/09 06:32 AM
Re: U-joint replacement	yodta	03/01/09 03:36 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.736s Queries: 16 (3.734s) Memory: 0.6030 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-06-19 01:44:23 UTC
Valid HTML 5 and Valid CSS