torsion bar install

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: torsion bar install [Re: ErikB] #933788 03/30/09 03:08 AM

Joined: Sep 2006

Posts: 981

CJMT100

Rock Warrior

I know in my case when I put the bilsteins in i got a 1/2 all around, but the old ones were shot and or blown in some cases.

1996 T100, Mickey Thomson Classics, Bridgestone Dueler AT 265/75/16, custom offroad KC's.

Entire Thread
Subject	Posted By	Posted
torsion bar install	toyT100	03/02/09 06:33 PM
Re: torsion bar install	Kookadala	03/02/09 09:45 PM
Re: torsion bar install	95T100	03/02/09 11:37 PM
Re: torsion bar install	totallyunimodular	03/08/09 12:33 AM
Re: torsion bar install	totallyunimodular	03/21/09 03:09 PM
Re: torsion bar install	wsquaredodie	03/23/09 11:32 PM
Re: torsion bar install	BamZipPow	03/24/09 02:46 AM
Re: torsion bar install	wsquaredodie	03/28/09 08:04 PM
Re: torsion bar install	BamZipPow	03/28/09 08:57 PM
Re: torsion bar install	CJMT100	03/29/09 03:43 AM
Re: torsion bar install	ErikB	03/30/09 01:59 AM
Re: torsion bar install	CJMT100	03/30/09 03:08 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.545s Queries: 16 (3.543s) Memory: 0.6174 MB (Peak: 0.6504 MB) Data Comp: Off Server Time: 2026-06-17 01:33:02 UTC
Valid HTML 5 and Valid CSS