|
|
|
|
 1996 T100 Driveshaft (Slip yoke)
#934932
03/08/09 11:02 PM
|
Joined: Feb 2008
Posts: 39
OP
Getting the Wheeling Fever
|
Okay so I need to get a new slip yoke and was wondering if there were anyother toyota slip yokes that would be compatible with a t100's slip yoke. it is the one that attaches to the rear diff. Also if anyone has one and would like to sell it please let me know, i need one soon.
|
|
|
Re: 1996 T100 Driveshaft (Slip yoke)
[Re: T100_4x4]
#934933
03/09/09 06:19 PM
|
Joined: Feb 2000
Posts: 4,160
Toyota Moderator
|
It looks the same as all the other Toy 4x4's I've worked on but I've never tried swapping. The bolt pattern at the diff flange is definitely the same as the '85-up trucks and 4runners.
|
|
|
Re: 1996 T100 Driveshaft (Slip yoke)
[Re: ErikB]
#934934
03/09/09 06:53 PM
|
Joined: Feb 2008
Posts: 39
OP
Getting the Wheeling Fever
|
u think i could swap one out?
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.293s Queries: 15 (0.003s) Memory: 0.5928 MB (Peak: 0.6458 MB) Data Comp: Off Server Time: 2026-05-29 15:28:47 UTCValid HTML 5 and Valid CSS 
