Raider/Montero Hub socket

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Raider/Montero Hub socket #935347 03/11/09 03:41 PM

Joined: May 2002

Posts: 270

Columbus, Ohio

TrooperXS

Mudrunner

Hey Guys,

I don't know what your situation is on the 1st gen Montero/Raider hub socket. I have a cheap effective solution. I bought a new Old Stock KD Tools Ford Dana 44 hub socket for $10.00 on ebay (#3246 )it has 4 prongs. 2 of them match up with the 88 raider hub nut i have in the garage. I ground the other 2 off. It should work wonderfully for setting preload and tightening the nut down.

- Jason

- jason

2004 GMC
1987 Samurai

Go Army

Entire Thread
Subject	Posted By	Posted
Raider/Montero Hub socket	TrooperXS	03/11/09 03:41 PM
Re: Raider/Montero Hub socket	MontyMcV	03/11/09 04:11 PM
Re: Raider/Montero Hub socket	sparkem	03/11/09 05:21 PM
Re: Raider/Montero Hub socket	bergie	03/14/09 05:54 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.705s Queries: 15 (3.703s) Memory: 0.5976 MB (Peak: 0.6306 MB) Data Comp: Off Server Time: 2026-05-26 10:37:48 UTC
Valid HTML 5 and Valid CSS