Anyone installed a Double-DIN radio in a GenIII?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Anyone installed a Double-DIN radio in a GenIII? [Re: Guntero] #935666 03/15/09 12:59 AM

Joined: May 2001

Posts: 4,079

Apache Jct, Arizona,USA

lordtrunks Offline

Roll Me Over

The system is factory amped there is a kit that will give you rca connectors to plug into your new head unit or you need to find and unplug and remove the factory amp the connect where the amp is, which will may still need a kit to extend wires if its not close.

89 2 dr turbo diesel
89/88 "Backwoods sas"

Entire Thread
Subject	Posted By	Posted
Anyone installed a Double-DIN radio in a GenIII?	Guntero	03/13/09 07:08 PM
Re: Anyone installed a Double-DIN radio in a GenIII?	lordtrunks	03/15/09 12:59 AM
Re: Anyone installed a Double-DIN radio in a GenIII?	lordtrunks	03/15/09 01:03 AM
Re: Anyone installed a Double-DIN radio in a GenIII?	Guntero	03/15/09 08:40 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.621s Queries: 16 (3.619s) Memory: 0.5983 MB (Peak: 0.6313 MB) Data Comp: Off Server Time: 2026-06-16 03:50:58 UTC
Valid HTML 5 and Valid CSS