Anyhow, so getting back to the topic at hand... the winch is a 12k lbs model. Fully packed, My rig might end up being 5k.

[color:"#666666"]As an aside, I've had a couple of folks ask why I thought I'd need a 12k winch instead of an 8k, 9k, or even 10k model. I based my decision of the reality that the max pull capacity w/ 4 layers of cable on the spool is only 7k and you usually don't pay out all your line down the a single layer when winching. Also, it was a lot cheaper than the hydraulic which I would have preferred[/color]

OK, back to my question... Is a bumper made with 1/4" steel angle iron (a 'c' shaped channel) that's mounted using 8x 5/16" bolts (Grade 8) to a very re-enforced frame (5/16-3/8" sheet metal pieces) strong enough for this winch?

If not, how thick does it need to be. I know some of you guys have 'wenches' (paypal acct set up yet? <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> ) on the fronts of your rigs. Wondering if any of you have given this much thought or if you've got your winches mounted to similarly designed bumpers.

TIA. <img src="/forums/images/graemlins/kewl.gif" alt="" />