cran pulley / harmonic balancer replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: cran pulley / harmonic balancer replacement [Re: nmack] #937233 03/25/09 11:48 PM

Joined: Sep 2003

Posts: 1,214

JLEMOND

Body Damage is Cool

Quote

I have a 95 trooper LS and need to replace the crankshaft pulley / harmonic balancer. The part is virtually non-existent used. Is there a rodeo part I can use or any other vehicle?

I HAVE THE BALANCER FROM A 2500 MI ENG, USED BUT PERFECT, 100.00 PLUS THE POSTAGE IN THE U.S 10.35 FLAT RATE , JERRY

Entire Thread
Subject	Posted By	Posted
cran pulley / harmonic balancer replacement	nmack	03/24/09 01:59 AM
Re: cran pulley / harmonic balancer replacement	BigSwede	03/24/09 02:29 PM
Re: cran pulley / harmonic balancer replacement	JLEMOND	03/25/09 11:48 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.233s Queries: 16 (5.231s) Memory: 0.5961 MB (Peak: 0.6291 MB) Data Comp: Off Server Time: 2026-05-25 14:03:38 UTC
Valid HTML 5 and Valid CSS