Downey Torsion Bars

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Downey Torsion Bars [Re: adam] #937580 03/30/09 02:07 AM

Joined: Jun 2002

Posts: 5,089

Hattiesburg, MS

jroc

Trail Leader

I have a set of Downeys on my truck. Been on there since about 03. No problems. I have em a bit tight though cause when I hook up to a trailer the front end becomes a diving board. It's the only thing I can figure is causing that. Also have a TJM winch bull bar (no winch) on it. My stock ones are sitting in storage........

Entire Thread
Subject	Posted By	Posted
Downey Torsion Bars	NorCalT1	03/27/09 02:50 AM
Re: Downey Torsion Bars	jmoser	03/27/09 05:12 AM
Re: Downey Torsion Bars	NorCalT1	03/27/09 06:11 AM
Re: Downey Torsion Bars	adam	03/29/09 07:48 PM
Re: Downey Torsion Bars	NorCalT1	03/29/09 11:02 PM
Re: Downey Torsion Bars	CJMT100	03/30/09 01:35 AM
Re: Downey Torsion Bars	ErikB	03/30/09 01:51 AM
Re: Downey Torsion Bars	NorCalT1	03/30/09 02:46 AM
Re: Downey Torsion Bars	jroc	03/30/09 02:07 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.490s Queries: 16 (3.488s) Memory: 0.6102 MB (Peak: 0.6432 MB) Data Comp: Off Server Time: 2026-06-18 10:21:55 UTC
Valid HTML 5 and Valid CSS