Transfer case popping out of 4wd

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Transfer case popping out of 4wd [Re: CJMT100] #937594 03/27/09 04:09 PM

Joined: Nov 2008

Posts: 63

Lafayette, CO

Chip

Getting the Wheeling Fever

Ahhh...yes, it does have a 3" body lift, and that might explain things -- all the bouncing around on the rough roads perhaps causing the boot to pull on the lever or something. I guess a good test would be to unscrew the boot mount so the lever has nothing pulling on it.

Entire Thread
Subject	Posted By	Posted
Transfer case popping out of 4wd	Chip	03/27/09 04:21 AM
Re: Transfer case popping out of 4wd	jmoser	03/27/09 05:14 AM
Re: Transfer case popping out of 4wd	Chip	03/27/09 03:41 PM
Re: Transfer case popping out of 4wd	CJMT100	03/27/09 03:52 PM
Re: Transfer case popping out of 4wd	Chip	03/27/09 04:09 PM
Re: Transfer case popping out of 4wd	CJMT100	03/28/09 03:59 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.635s Queries: 16 (3.633s) Memory: 0.6037 MB (Peak: 0.6367 MB) Data Comp: Off Server Time: 2026-06-03 03:46:20 UTC
Valid HTML 5 and Valid CSS