I have an 89 Raider with 2.6 That is pretty much built and only used in the bush. I read a couple posts back that I can ditch the reed valve by unscrewing pipe from manifold and put a quarter in there and screw fitting back on? Do I just plug the vacuum hose off that runs to it? and do I just leave the opening on the air cleaner where the big hose went open?

89 Raider 2.6 with 32x9.50 Tsl Bias on stock rims turned inside out. Yota shackles in rear front T bars cranked no sway bar,ditched reed valve and capped with quarter