Ditching the reed valve on Raider?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Ditching the reed valve on Raider? [Re: GUNIT] #938548 04/03/09 05:56 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

I cut off the steel pipe and crimped it shut and welded the edge, AND put a quarter in there, too. Just cap the vac line. I blocked off the air cleaner hole.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Ditching the reed valve on Raider?	GUNIT	04/02/09 09:10 PM
Re: Ditching the reed valve on Raider?	fasteddy	04/03/09 05:56 PM
Re: Ditching the reed valve on Raider?	GUNIT	04/03/09 08:20 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.627s Queries: 16 (3.625s) Memory: 0.5971 MB (Peak: 0.6301 MB) Data Comp: Off Server Time: 2026-06-10 05:32:45 UTC
Valid HTML 5 and Valid CSS