Ditching the reed valve on Raider?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Ditching the reed valve on Raider? [Re: fasteddy] #938549 04/03/09 08:20 PM

Joined: Oct 2007

Posts: 25

Ohio

GUNIT

Getting the Wheeling Fever

Thanks fasteddy I dont have smog check where I live and it pretty much stays in the bush, The more crap I can get off this motor the better.

89 Raider 2.6 with 32x9.50 Tsl Bias on stock rims turned inside out. Yota shackles in rear front T bars cranked no sway bar,ditched reed valve and capped with quarter

Entire Thread
Subject	Posted By	Posted
Ditching the reed valve on Raider?	GUNIT	04/02/09 09:10 PM
Re: Ditching the reed valve on Raider?	fasteddy	04/03/09 05:56 PM
Re: Ditching the reed valve on Raider?	GUNIT	04/03/09 08:20 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.515s Queries: 16 (3.513s) Memory: 0.5967 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-06-12 18:28:39 UTC
Valid HTML 5 and Valid CSS