Replaced blower motor resistor and fan still does not work

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Replaced blower motor resistor and fan still does not work #938797 04/04/09 06:40 PM

Joined: Jun 2007

Posts: 33

mattd

Getting the Wheeling Fever

Just finished replaced my blower motor resistor and the fan still does not work on any of the speeds. I'm thinking it might be the fan. I have already taken it out and was wondering if their is a way to test it to see if it spins.

Entire Thread
Subject	Posted By	Posted
Replaced blower motor resistor and fan still does not work	mattd	04/04/09 06:40 PM
Re: Replaced blower motor resistor and fan still does not work	BigJim	04/04/09 06:54 PM
Re: Replaced blower motor resistor and fan still does not work	mattd	04/04/09 07:17 PM
Re: Replaced blower motor resistor and fan still does not work	BigJim	04/04/09 08:23 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.428s Queries: 15 (5.426s) Memory: 0.5981 MB (Peak: 0.6311 MB) Data Comp: Off Server Time: 2026-07-13 14:33:02 UTC
Valid HTML 5 and Valid CSS