Dana 44 Rear Axle.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Dana 44 Rear Axle. #939235 04/07/09 04:12 AM

Joined: Apr 2009

Posts: 1

kneeil

Need a Spot

I need to rebuild my Dana 44 on my 1952 CJ3A. How do you replace the bearings and seals? It appears that the only way is to get the outside hubs off. I have tried a pretty heay duty wheel puller and even applied heat at the same time... they wont budge... kneeil@hotmail.com

Entire Thread
Subject	Posted By	Posted
Dana 44 Rear Axle.	kneeil	04/07/09 04:12 AM
Re: Dana 44 Rear Axle.	WB6TMV	04/07/09 10:38 AM
Re: Dana 44 Rear Axle.	superdawg	04/17/09 01:03 PM
Re: Dana 44 Rear Axle.	80CJ	04/29/09 10:22 AM
Re: Dana 44 Rear Axle.	superdawg	05/05/09 01:15 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.472s Queries: 15 (3.470s) Memory: 0.6002 MB (Peak: 0.6332 MB) Data Comp: Off Server Time: 2026-06-18 22:42:12 UTC
Valid HTML 5 and Valid CSS