seat lift?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: seat lift? [Re: xjammer] #939341 04/14/09 08:55 AM

Joined: Apr 2000

Posts: 947

California Central Coast

Berkeley

Jeep Moderator

I guess I never detailed that part of the project. I used iron pipe caps, 3/4" iirc. 1/2" would work, too. I'm about 5'-10" and the seat is about right.

You'll need longer all-thread, too. I forget the thread size, but I'm pretty sure it's metric.

Entire Thread
Subject	Posted By	Posted
seat lift?	xjammer	04/08/09 04:56 AM
Re: seat lift?	BigJim	04/08/09 03:13 PM
Re: seat lift?	Seattlegti	04/08/09 05:23 PM
Re: seat lift?	xjammer	04/08/09 09:41 PM
Re: seat lift?	Berkeley	04/14/09 08:55 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.772s Queries: 16 (3.770s) Memory: 0.6005 MB (Peak: 0.6335 MB) Data Comp: Off Server Time: 2026-06-02 15:11:03 UTC
Valid HTML 5 and Valid CSS