Source for some 2.6L hardware?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Source for some 2.6L hardware? #939394 04/08/09 01:26 PM

Joined: Feb 2008

Posts: 28

Misha80

Getting the Wheeling Fever

I need bellhousing to block bolts, starter bolts, and tranny crossmember to frame bolts. Anybody know where I can pick them up the cheapest/fastest?

TIA
Mick

98 Grand Cherokee 5.9 (Using 10% of the nations gas daily)
95 F-250 (The other 90% of the gas)
95 Honda Del Sol V-tec (Corner Carver)

Entire Thread
Subject	Posted By	Posted
Source for some 2.6L hardware?	Misha80	04/08/09 01:26 PM
Re: Source for some 2.6L hardware?	rxinhed	04/08/09 05:40 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.549s Queries: 15 (3.547s) Memory: 0.5939 MB (Peak: 0.6269 MB) Data Comp: Off Server Time: 2026-06-17 19:11:54 UTC
Valid HTML 5 and Valid CSS