|
|
|
|
 JK Front Fender removal?
#940344
04/15/09 02:14 AM
|
Joined: Oct 2006
Posts: 616
OP
Rock Warrior
|
Hi Guys!
Anyone have or know of a write up on how to remove the front passenger side plastic fender flare on a 08' JK?
I'm installing my River Raider snorkel and need to get the fender off!
also how do you remove the radio antenna and bezel?
Thanks in advance!
Mike B
08' Jeep Wrangler
64' Plymouth Sport Fury 383
58' Triumph TR-3A
|
|
|
Re: JK Front Fender removal?
[Re: Iron]
#940345
04/16/09 03:33 AM
|
Joined: Jan 2007
Posts: 534
Rock Warrior
|
If it's the same old way as usual, reach up in there and find the platic/ rubber things that the screws go into from the fender. Hold 'em tight and back out the screws. Keep all the hardware - you'll need it again. You can pull up the inner plastic fenders to get at the hardware. Yank it around to get where you need - it's pretty forgiving. If it's held in place with plastic anchors you can get new ones at Lowes or local Pep Boys, Advance Auto, Etc.
97tj, Shaved Ford 9 rear, 4:10's, New 35x12.5 BFG KM2's to test!, Warn x8000i, ARB's, Quick Disco's, Hand Throttle, & it's my DD. 
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.257s Queries: 15 (0.003s) Memory: 0.5871 MB (Peak: 0.6348 MB) Data Comp: Off Server Time: 2026-06-07 11:09:39 UTCValid HTML 5 and Valid CSS 
