question about cylinder heads on 89 mitsu.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: question about cylinder heads on 89 mitsu. [Re: fasteddy] #940520 04/16/09 06:04 AM

Joined: Feb 2006

Posts: 41

Utah

Thor

Getting the Wheeling Fever

Thanks. I found a extra one and wasn't sure. talked to a guy about hydraulic and he said he recommended the hydraulic though he had mechanical too. stated the latter was better, had extra cooling holes with a better thick alloy in the right places. Was curious because Had heard they were different. thanks again.

89 Montero, 2.6L 4cylinder. G54B

Entire Thread
Subject	Posted By	Posted
question about cylinder heads on 89 mitsu.	Thor	04/15/09 03:13 PM
Re: question about cylinder heads on 89 mitsu.	fasteddy	04/15/09 09:37 PM
Re: question about cylinder heads on 89 mitsu.	Thor	04/16/09 06:04 AM
Re: question about cylinder heads on 89 mitsu.	OldColt	04/16/09 11:21 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.877s Queries: 16 (3.874s) Memory: 0.5992 MB (Peak: 0.6322 MB) Data Comp: Off Server Time: 2026-11-02 16:01:58 UTC
Valid HTML 5 and Valid CSS