|
|
|
|
 question about cylinder heads on 89 mitsu.
#940518
04/15/09 03:13 PM
|
Joined: Feb 2006
Posts: 41
OP
Getting the Wheeling Fever
|
I don't recall who told me this, but I know i heard it. Is the Cylinder head on the 89 different than the other 4cyl? I thought someone said the Jet valves were different? I don't know if this was for 84-89 or just something different on 89 only. Can anyone tell me if this is true? Thanks.
89 Montero, 2.6L 4cylinder. G54B
|
|
|
Re: question about cylinder heads on 89 mitsu.
[Re: Thor]
#940519
04/15/09 09:37 PM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
AFAIK, all the late 2.6 heads are the same.
Not responsible for advice not taken...
|
|
|
Re: question about cylinder heads on 89 mitsu.
[Re: fasteddy]
#940520
04/16/09 06:04 AM
|
Joined: Feb 2006
Posts: 41
OP
Getting the Wheeling Fever
|
Thanks. I found a extra one and wasn't sure. talked to a guy about hydraulic and he said he recommended the hydraulic though he had mechanical too. stated the latter was better, had extra cooling holes with a better thick alloy in the right places. Was curious because Had heard they were different. thanks again.
89 Montero, 2.6L 4cylinder. G54B
|
|
|
Re: question about cylinder heads on 89 mitsu.
[Re: Thor]
#940521
04/16/09 11:21 AM
|
Joined: Sep 2006
Posts: 2,712
Roll Me Over
|
The 89 turbo head is different, I never thought if this would also be true in a normally aspirated application. Visually the 89 Turbo head has massive exhaust guide extension down into the port. This could be in an 88 head also. I did not research for any other differences.
Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.011s Queries: 15 (0.008s) Memory: 0.5993 MB (Peak: 0.6548 MB) Data Comp: Off Server Time: 2026-11-02 10:43:33 UTCValid HTML 5 and Valid CSS 
