Rusted Control Arms - Suggestions?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rusted Control Arms - Suggestions? [Re: andersonmh] #941219 04/20/09 03:41 PM

Joined: Apr 2006

Posts: 658

Honeoye NY

wsquaredodie Offline

Rock Warrior

POR-15 is the way to go. Expensive but works. I even painted some on my new exhaust pipe where the hanger is welded on at the back and so far no rust in sight.

trafdlo

Entire Thread
Subject	Posted By	Posted
Rusted Control Arms - Suggestions?	andersonmh	04/19/09 05:16 AM
Re: Rusted Control Arms - Suggestions?	eleet	04/19/09 07:57 AM
Re: Rusted Control Arms - Suggestions?	CJMT100	04/19/09 04:07 PM
Re: Rusted Control Arms - Suggestions?	andersonmh	04/20/09 05:43 AM
Re: Rusted Control Arms - Suggestions?	wsquaredodie	04/20/09 03:41 PM
Re: Rusted Control Arms - Suggestions?	foxtrapper	04/21/09 01:00 PM
Re: Rusted Control Arms - Suggestions?	Kookadala	04/22/09 10:17 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.505s Queries: 16 (3.503s) Memory: 0.6052 MB (Peak: 0.6382 MB) Data Comp: Off Server Time: 2026-06-12 22:31:37 UTC
Valid HTML 5 and Valid CSS