92 22re Rookie with a multimeter here... need help determining if the AFM is bad.

AFM readings are as follows:

Test 1

Between terminals Resistance per manual my reading

E2-Vs 20-400 ohms .916k ohms
E2-Vc 100-300 ohms 179.9 ohms
E2-Vb 200-400 ohms 279.5 ohms
E2-THA 2-3k ohms @ 68 degrees 1.611 @ 85-90 deg
.9-1.3k ohms @ 104 degrees
E1-Fc infinity Nothing.

Test 2

E1-Fc Infinity fully closed Nothing.
0 at other than fully closed .2

E2-Vs 20-400 fully closed .735
20-1000 fully open .72k

When I say that I recording nothing, I mean I recorded a zero-the guage didn't even budge. All tests were done 2x to ensure accuracy. I am leaning towards the AFM being bad but want some clarification from those in the know before I replace it. I want to make sure I'm right! <img src="/forums/images/graemlins/lol.gif" alt="" />

Any help is appreciated...

Both o2 sensors tested right on the money.