I already replaced the sway bar end link bushings w/ poly. I replaced the idler arm w/ the insane T/C idler arm two weeks ago, and Toyota dealer replaced my relay rod 2-3 months ago.
I have no play in the front end (ball joints, tie rods, bearings and so on) I may replace the tie rods just because they donÆt cost much and the ones on there have no grease in them w/ ripped boots.
I already replaced the center drive line bearing, no vibe there.
My next step is replacing the shocks to BilsteinÆs.
Last will be to replace the upper and lower control arm bushings if I still have the vibe, even though they donÆt look bad and no play.
How can you guys see/tell if the body mount bushings are bad?? I cant really see the bushing itself, just the mount around it.
The truck handles/drives good. Every thing feels and looks tight other than the slight shimmy/shake in the floor board/cab and seat, that recently started and comes and goes on my 25 min commute to and from work.(40-75mph)