If you are replacing the rotors just beat the rotor off the hub. I had to do that to mine. Those bolts don't bolt down the abs ring. The ring has two 12mm bolts that go in on the same side as the abs ring. I am willing to bet money that rust is keeping the bolts from coming out. Just use a small punch from the back side to knock them out.

Edit
Just spray the abs ring the a ***** ton of PB blaster. That should make it come off then you can get to the nuts that are under the abs ring.

Last edited by Brianawd; 06/12/09 03:47 AM.
92 Galant vr4 11.17at132mph
98 Montero 2.5"lift,33/10.50/15,15x8procomp wheels.
trail-gear rock sliders,ARB front bumper,Warn m8000 winch. Piaa lights.